| S.I.G.V.A. HE-10 M.A.V. |
|
● The S.I.G.V.A. HE-10 M.A.V. (1,100 x 550 x 400 mm.) It is a fixed-bed milling-engraving machine that will allow you to carry out large jobs (erosion electrodes, moulds, forging stamps, rollers, etc...).
● The HE-10 M.A.V. It represents a definitive step forward compared to conventional systems based on numerical control. Its control system based on P.C. It offers us great advantages over numerical control such as larger memory, greater power and calculation speed, greater storage possibilities and, ultimately, higher data processing speeds.
● The HE-10 M.A.V. incorporates the S.I.G.V.A. that automatically translates conventional numerical control language (ISO) into High Speed language. When carrying out the transmission, thanks to the greater resources that the PC offers us, the system, by means of a previous reading of the program, anticipates the movements that it must carry out. In this way, a great reduction in machining times is achieved.
|
| ● STURDINESS |
|
■ Its construction with an electro-welded steel frame and cast iron table guarantees magnificent finishes for work on all types of materials (steel, bronze, copper, graphite, etc...).
|
| ● HIGH SPEED |
|
■ Its movement control system through a conventional PC allows for HIGH SPEED machining. Check how the machining speeds (previously theoretical) are real for the first time, not only in movements in a straight line, but also in any other type of movement (circles, diagonals, 3D, ...). With HIGH SPEED MACHINING you will significantly reduce working times.
|
| ● PRECISION |
|
■ The prismatic skate guide system provides maximum precision and repeatability. Surprise yourself and your customers with the finish that S.I.G.V.A. HE-10 will provide their jobs.
|
 |
 |
| Mod. S.I.G.V.A. HE-10 M.A.V. |
Brushless motor C.A. KOLLMORGEN-SEIDEL |
 |
|
| Detail of electronic divider in mod. mod. HE-10 M.A.V. |
Hollow piece of graphite for car speaker with more than 3,000 conical holes of ø 1 mm. |
| |
 |
 |
| HE-10 M.A.V. making a complicated high relief engraving of 1.000 x 500 mm. |
Detalle de la grabación alto relieve de la imagen anterior. |
|
Engraved roller detail.
|
Mod. HE-10 M.A.V. with 4th axis installed, engraving roller of ⌀125 x 500 mm.
|
Finished aluminum roller (ø 125 x 500 mm.). |
|
| ● TECHNICAL CHARACTERISTICS |
|
● High Speed Machining System.
● Prismatic skate guides with continuous recirculation of balls.
● Precision ball screws with double preloaded nut on the 3 axes.
● Safety micros, end of travel.
● Direct Current (C.C.) Servomotors.
● Protective bellows on all guides.
|
| ● EFFECTIVE TRAVEL |
● Work surface (X, Y, Z) .......... 1.100 x 550 x 400 mm. |
| ● WORK TABLE |
● Table dimensions ................... 1.160 x 720 mm.
● Table to floor height ..................... 950 mm.
● Maximum weight on the table ............... 1.000 Kgrs. |
|
● HEAD
|
|
Its 3hp head with the possibility of an interchangeable cone system (optional) allows you to comfortably carry out the operations of automatic change, preparation and calibration of tools. With a wide range of speeds (0 - 24,000 r.p.m.), controlled at all times through the computer's serial port, it guarantees an unbeatable finish on all kinds of materials, making it an essential tool for precision engraving.
■ Vertical course (Z) ................................. 400 mm.
■ A.C. motor ............................................... 3 C.V.
■ Speed range by frequency inverter:
- Minimum ......................................... 0 r.p.m.
- Maximum ................................ 24.000 r.p.m.
■ Mooring capacity ................... Ø1 a 12,7 mm.
|
| ● HIGH SPEED CONTROL SYSTEM |
|
■ Control of up to 4 Axes, with linear, circular and helical interpolation.
■ Protection against: high current, high voltage, high temperature.
■ 14 Inputs + 3 Optocoupled Outputs.
■ Total control through the computer.
■ Set to "0" machine, automatic.
■ Go to coordinates.
■ Selection of the pitch of the axes for manual positioning.
■ Variation of the programmed working speed (2% to -------140%).
■ Fast execution of programs at High Speed.
■ Continuous transmission of programs. (Computer - Machine).
|
| |
| ● SPEEDS |
■ Maximum speed (X, Y, Z) ............... 7,5 mtr./mn.
■ Working speed (X, Y, Z) .. 4 mtr./mn. |
| ● MACHINE DIMENSIONS |
■ Maximum dimensions ..... 2.100 x 1.300 x 1.800 mm. |
| ● WEIGHT |
|
■ Peso neto ......................................... 2.550 Kgrs.
■ Peso bruto ........................................ 2.280 Kgrs.
|
| ● PACKAGING |
|
■ Dimensions .............. 2.800 x 1.500 x 2.000 mm.
■ Volume ................................................ 8,4 m3.
|
|
- For machining rollers or cones.
