C.N.C. ENGRAVING MACHINE WITH HIGH SPEED SYSTEM

mod. iEP- CAN

● TECHNICHAL CHARACTERISTICS

● Ball screws in the 3 axes.
● Safety micros, end of travel.
● Prismatic type sliding guides, with
continuous recirculation of balls.
● Fully enclosed with security opening.
● Protection bellows in all the guides.
● Low noise level 78 dB (A).

● EFFECTIVE TRAVEL

■ Work surface (X, Y, Z) ....... 400 x 300 x 135 mm.

● TABLE DIMENSIONS

■ Dimensions ........................................ 600 x 375 mm.

● HEAD

■ High speed head.
■ Start - stop, manual and by C.N.C.
■ Number of revolutions:
▪ Minimum ............................................... 11,000 r.p.m.
▪ Maximum .............................................. 25,000 r.p.m.
■ Maximum tool capacity. ............................... Ø 8mm.
■ Power .................................................... 1,050 watts.
■ Voltage ............................................................ 220V.
■ Possibility of being able to install
diamond for engraving ......................................... Yes.

● NUMERICAL CONTROL

■ Integrated iMC-CAN control with 4 Regulators.
■ Communications protocol, CAN-Bus system.
■ Control Unit, integrated in P.C. Industrial with Windows System.
■ Machine Control Software, included.
■ Simultaneous interpolation of the 4 axes.
■ Module with 16 inputs / 16 optocoupled outputs.
■ State Security and Monitoring Circuit.
■ 48V./1,000W Power Unit.
■ Function Keys and Emergency Stop.

● ACTUATORS

■ Servo Motor System.
■ Spindles in the X/Y axes. ........................... 16 x 10mm.
■ Spindle in the Z axis. ..................................16 x 4 mm .

● RESOLUTION / PRECISION

■ Resolution X/Y/Z. ....................................... 0,001 mm.

● SPEEDS

■ Maxmimum speed X/Y/Z. ............................ 200 mm/s.

● MACHINE OUTSIDE DIMENSIONS

■ Width. ........................................................ 780 mm.
■ Depth. ........................................................ 835 mm.
■ Height (with feet and door fairing closed). 806 mm.
■ Height (with feet and fairing door open). 1.250 mm.

● WEIGHT

■ Net weight ........................................................ 120 kg.
■ Gross weight .................................................... 145 kg.

● EMBALAJE

■ Dimensions .... 1.000 x 1.020 x 1.020 mm. - 1,04 m³.

● Standard EQUIPMENT INCLUDED (in each machine)

1 WinCAN control software.
1 High-speed head from 11,000 to 25,000 r.p.m.
1 Tool holder nut.
1 8mm clamp. Ø.
1 Set of fastening flanges.
1 Set of service keys.
1 Toolbox.

● EQUIPO OPCIONAL

■ 3 hp. Head Pliers, from Ø 1 to 12.7 mm
■ Automatic tool change
■ Electronic approach steering wheel
■ Integral fairing with safety lock
■ Chip protector
■ Automatic reset device
■ Laser Probe for Calibration.
■ Laser for Tool Measurement
■ LED lighting lamps
■ MQL Lubrication Equipment
■ Oil mist cooling equipment
■ CAD/CAM engraving 2 ½D, NasCAD 2000 © Plus
■ CAD/CAM of 3D artistic engraving, ModelArt3D.net
■ CAD/CAM for photo engraving PhotoNAS
■ ELECTRONIC DIVIDER - 4th AXIS A. *
   * For roller machining..
■ Personal computer for design, complete
■ Vacuum clamp tables
■ Special jaws for irregular pieces
■ Precision jaws, ground
■ Eccentric clamping flanges + ruler
■ Magnifying and Measuring Loupes
■ USB magnifying microscope
■ Diamond tools
■ Diamond Set for Marking
■ Thread chuck for quick change collet
■ Automatic Threader

Graphite electrode for plastic injection molds.