C.N.C. ENGRAVER BY COMPUTER

mod. EP- 2015

● TECHNICAL CHARACTERISTICS

● Ball screws in the 3 axes.
● Safety micros, end of travel.
● Prismatic type sliding guides, with
continuous recirculation of balls.
● Fully faired with security opening.
● Protective bellows on all guides.
● Low noise level 78 dB (A).

● EFFECTIVE TRAVEL

■ Work surface (X,Y,Z) ..........200 x 150 x 90 mm.

● TABLE DIMENSIONS

■ Dimensions .......................................... 425 x 250mm.

● HEAD

■ High speed head.
■ Start - stop, manual and by C.N.C.
■ Number of revolutions:
▪ Minimum ...........................................11,000 r.p.m.
▪ Maximum ...........................................25,000 r.p.m.
■ Maximum tool capacity. ...............Ø 6 mm.
■ Power ................................................ ..... 500 watts.
■ Voltage ................................................ .................220V.
■ Possibility of being able to install
diamond for engraving ........................................... Yes.

● NUMERICAL CONTROL

■ 4 Axis Control.
■ Simultaneous interpolation of the 4 axes.
■ DNC streaming. (Computer-C.N.C).
■ Transmission speed ................... 19,200 baud.
■ Reset to "0" machine, automatic.

● DRIVES

■ Sistema Brushless (sin escobillas). 

● RESOLUTION

■ Resolution X, Y, Z ....................... 0,02 mm. (estandar).
■ Resolution X, Y, Z ........................ 0,01 mm. (optional).

● SPEEDS

■ Maximum speed ....................................... 150 mm/s.

● MACHINE DIMENSIONS

■ Dimensiones exteriores ............... 515 x 580 x 615 mm.

● PESOS

■ Net weight ........................................................ 71 kg.
■ Gross weight ....................................................... 96 kg.

● PACKAGING

■ Dimensions .............. 700 x 700 x 850 mm. - 0,42 m³.

● Standard EQUIPMENT INCLUDED (on each machine)

1 WinEP control software (Windows).
1 High speed head from 11,000 to 25,000 r.p.m.
1 Tool holder nut.
1 6 mm clamp Ø.
1 set of fastening ties.
1 set of service keys.
1 Tool box.

● OPTIONAL EQUIPMENT

■ 500 W head clamps, from Ø 1 to 6 mm.
■ 1,050 W. power head, clamp up to Ø 8 mm.
■ 1050 W head clamps, from Ø 1 to 8 mm.
■ Touch Probe System.
   (Automatic zero setting device).
■ 2 ½D engraving CAD/CAM,  NasCAD 2000 © Plus
■ CAD/CAM of 3D artistic engraving, ModelArt3D.net
■ CAD/CAM para grabado de fotografías PhotoNAS
■ Personal Computer for design, complete.
■ Integrated interior fluorescent lamp.
■ Diamond Set for Marking.
■ ELECTRONIC SPINDER - 4th AXIS W *
    * For roller machining.
■ MQL Lubrication Equipment.
■ Vacuum fixing table (see, various measures).
■ Eccentric Mooring Flanges + Ruler
■ Special jaws with adjustable blades
for holding all kinds of irregular shapes.
   (Openings of 100, 200 and 300 mm.)
■ Magnification and Measurement Loupes
■ 40X USB magnifying glass for P.C.