|
● TECHNICAL CHARACTERISTICS
● Ball screws in the 3 axes.
● Safety micros, end of travel.
● Prismatic type sliding guides, with
continuous recirculation of balls.
● Fully enclosed with security opening.
● Protection bellows in all the guides.
● Low noise level 78 dB (A).
● EFFECTIVE TRAVEL
■ Work surface (X, Y, Z) ........ 295 x 200 x 130 mm.
● TABLE DIMENSIONS
■ Dimensions ............................................ 500 x 250 mm.
● HEAD
■ High speed head.
■ Start - stop, manual and by C.N.C.
■ Number of revolutions:
▪ Minimum ............................................ 11,000 rpm
▪ Maximum ........................................ 25,000 r.p.m.
■ Maximum tool capacity. .................................... Ø6mm.
■ Power ........................................................... 500 watts.
■ Voltage ................................................................. 220V
■ Possibility of being able to install
diamond for engraving .............................................. Yes.
● NUMERICAL CONTROL
■ 4 Axis Control.
■ Simultaneous interpolation of the 4 axes.
■ DNC continuous transmission. (Computer-C.N.C)
■ Transmission speed ............................. 19,200 bauds.
■ Set to "0" machine, automatic.
● ACTUATORS
■ Brushless system
● RESOLUTION
■ X, Y, Z resolution .......................... 0,02 mm. (standar).
■ X, Y, Z resolution .......................... 0,01 mm. (optional).
● SPEED
■ Maximum speed ........................................... 150 mm/s.
● MACHINE DIMENSIONS
■ Outer dimensions ................. 610 x 655 x 705 mm.
● WEIGHT
■ Peso neto ........................................................... 76 kg
■ Peso bruto ........................................................ 101 kg
● PACKAGING
■ Dimensions ................... 820 x 820 x 940 mm - 0,64 m3.
● Standard EQUIPMENT INCLUDED (in each machine)
1 WinEP control software (Windows)
1 High speed head from 11,000 to 25,000 r.p.m.
1 Tool holder screw.
1 6 mm clamp. Ø.
1 Set of fastening flanges.
1 Service key set.
1 Toolbox.
● OPTIONAL EQUIPMENT
■ 500 W head clamps, from Ø 1 to 6 mm.
■ 1,050 W. power head, clamp up to Ø 8 mm.
■ 1050 W head clamps, from Ø 1 to 8 mm.
■ Touch Probe System.
(Automatic zero setting device).
■ 2 ½D engraving CAD/CAM, NasCAD 2000 © Plus
■ CAD/CAM of 3D artistic engraving, ModelArt3D.net
■ CAD/CAM para grabado de fotografías PhotoNAS
■ Personal Computer for design, complete.
■ Integrated interior fluorescent lamp.
■ Diamond Set for Marking.
■ ELECTRONIC SPINDER - 4th AXIS W *
* For roller machining.
■ MQL Lubrication Equipment.
■ Vacuum fixing table (see, various measures).
■ Eccentric Mooring Flanges + Ruler
■ Special jaws with adjustable blades
for holding all kinds of irregular shapes.
(Openings of 100, 200 and 300 mm.)
■ Magnification and Measurement Loupes
■ 40X USB magnifying glass for P.C.
|
