| S.I.G.V.A. HE-9 M.A.V. |
● The effective travel of this S.I.G.V.A. HE-9 M.A.V. (390 x 390 x 400 mm.) allow you to cover a wide range of sizes for medium series jobs (erosion electrodes, steel inserts, punches, markers, etc). ● Equipped with a control system based on P.C. achieves a definitive advance against conventional systems based on numerical control. The C.P. It offers us great advantages compared to numerical control such as larger memory, greater power and calculation speed, greater storage possibilities and, ultimately, higher data processing speeds. ●The HE-9 M.A.V. enter the system BECKHOFF that automatically translates conventional numerical control language (ISO) into High Speed language. When carrying out the transmission, thanks to the greater resources that the PC offers us, the system, by means of a previous reading of the program, anticipates the movements that must be carried out and recalculates the necessary parameters. In this way, a great reduction in machining times is achieved.
|
| ● STURDINESS |
|
■ Its robust conception design guarantees magnificent finishes for work on all kinds of materials (steel, bronze, copper, graphite, etc...).
|
| ● ACTUATORS |
|
■ Brushless Alternating Current (AC.) Servomotors with 18-bit resolution multiturn "absolute encoder".
|
| ● HIGH SPEED |
|
■ Its movement control system through a conventional PC allows for HIGH SPEED machining. Now you will be able to check how the machining speeds (previously theoretical) are real for the first time, not only in movements in a straight line but also in any other type of movement (circles, diagonals, 3D, ...). Get substantial savings in machining times through HIGH SPEED MACHINING..
|
| ● PRECISION |
|
■ Benefit from the maximum movement reliability of the prismatic skate guide system. Surprise yourself and your customers with the precision that S.I.G.V.A. HE-9 will provide your prints.
|
 |
| Front touch monitor with built-in electronic steering wheel. |
 |
 |
Small samples
of works in graphite in height
and low relief. |
Small parts
of graphite for erosion in high and low relief. |
| |
|
 |
 |
| Electrolytic copper for erosion and final finished piece. Car industry. |
3D graphite detail for casing. |
| |
|
 |
 |
| Magnified with a magnifying glass we can see characters in high relief 6 tenths high, next to the tip of a mine holder. |
Closer detail of the previous piece where the projection of the text (0.6 mm.) on an inclined plane can be seen. |
| |
|
 |
 |
| 3D graphite to erode shell mold (300 x 300 x 80 mm.) |
High-speed machining of a treated steel part. |
| |
|
 |
 |
| Cylindrical graphite piece machined in 4th axis. Car industry. |
Various pieces in electrolytic copper, brass, steel. |
| |
|
 |
 |
| Interior of a mod. HE-9 M.A.V. with 3 C.V. head, tool change and built-in lighting. |
Various pieces in steel and brass for footwear and leather goods. |
| |
|
 |
 |
| Interior of a mod. HE-9 M.A.V. with 1.5 C.V. head, tool change and built-in lighting. |
High precision graphite executed with an electronic divider, for injection molding of "drop by drop irrigation" parts. |
| |
|
 |
 |
| 3D graphite for the automotive industry. |
Mod. HE-9 M.A.V. |
|
| ● TECHNICAL CHARACTERISTICS |
|
● Effective travel ............................................... X= 390 mm.
● Effective travel ............................................... Y= 390 mm.
● Effective travel ............................................... Z= 400 mm.
● High Speed Machining System.
● Precision ball screws with double preloaded nut
in all 3 axes.
● Alternating Current (A.C.) Brushless Servomotors with
absolute encoder.
● Prismatic slide guides, with recirculation
continuous of balls
● Protective bellows on all guides.
|
| ● HEAD |
|
Its 3 hp With the possibility of an interchangeable cone system (optional) it allows you to comfortably carry out the operations of automatic change, preparation and calibration of tools. With a wide range of speeds (0 - 24,000 r.p.m.), controlled at all times by the user, it guarantees an unbeatable finish on all kinds of materials, making it an essential tool for precision engraving.
■ Vertical course (Z) .................................................400mm.
■ A.C. motor ............................................................... 3 C.V.
■ Speed range per frequency inverter:
▪ Minimum ................................................................... 0 rpm.
▪ Highs ............................................................... 24,000 rpm.
■ Clamping capacity ................................... Ø1 to 12.7 mm.
|
| ● WORK TABLE |
|
■ Table dimensions ....................................... 600 x 240 mm.
■ Number of "T" slots ......................................................... 3.
■ Distance between slots .......................................... 72 mm.
■ Height from the table to the ground...................... 950 mm.
■ Maximum weight on the table ................................ 500 kg.
|
| ● HIGH SPEED CONTROL SYSTEM |
■ BECKHOFF numerical control CP2216 controlled by PC and integrated PLC and software TwinCAT 3 NC I..
■ TwinCAT 3 NC I, 3 interpolated main axes, up to 5 auxiliaries per group, one group per channel and up to 31 channels.
■ 2 Ethernet ports with 2 x 10/100/1000.
■ 15.6” Multi-touch monitor, 1366 x 768 pixel display.
■ 1 RS232 Serial Port and 4 USB 2.0 ports.
■ UPS Uninterruptible power supply unit, integrated in the 24 V power supply, without batteries.
■ 1 DVI-D port occupied by the monitor and 1 free DVI-I port.
■ 1 free slot for Mini PCI cards.
■ 2½” Solid State Hard Drive, 320 GB.
■ Open architecture and programmable CNC control software.
■ Minimum cycle time of 50 microseconds.
■ Zero point offsets, tool offsets, M and H functions, mathematical functions, parameter / variable programming, user macros, spindle and auxiliary functions, zero point offsets, tool functions, ....
■ Comprehensive geometry functions: linear, circular and helical interpolation in the principal planes and freely definable levels, max. 32 axis interpolation path per channel (optional), look-ahead function.
|
| ● RESOLUTION |
|
■ Resolution X, Y, Z ........................................... 0,001 mm.
|
| ● SPEEDS |
■ Maximum speed (X, Y, Z) ............................. 12 mtr./min.
■ Maximum working speed (X, Y, Z) ..............12 mtr./min. |
| ● MACHINE DIMENSIONS |
■ Maximum dimensions ............ 1.190 x 1.150 x 1.800 mm. |
| ● WEIGHT |
■ Gross weight ....................................................... 650 kg.
■ Net weight ........................................................... 800 kg. |
| ● PACKAGING |
■ Dimensions ............................ 1.500 x 1.400 x 2.000 mm.
■ Volume ................................................................. 4,2 m3. |
| ● Standard EQUIPMENT INCLUDED (in each machine) |
|
|
Mod. HE-9 M.A.V. |
| |
|
Mod. HE-9 M.A.V. |
| |
Graphite for logo erosion
and final piece. Car industry. |
Various pieces made of electrolytic copper
for jewelry and injection molds. |
|
